Berthold Marx
Cart
Berthold Marx
Where can you find our references?
Home > Our products > Traction gas springs > Stainless Threaded Gas Spring - Rod 10mm

Stainless Threaded Gas Spring - Rod 10mm

Thread M8 | Stroke 100 to 250 mm | Force 150 to 1200N

1. Reference

Traction gas spring works in reverse to the compression gas spring. Used to hold or pull hatches. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum gap of 0.5mm required). Screw the end fitting completely on the gas spring thread, without leaving any gap.

Print

Stainless Threaded Gas Spring - Rod 10mm

Thread M8 | Stroke 100 to 250 mm | Force 150 to 1200N

1. Reference

Traction gas spring works in reverse to the compression gas spring. Used to hold or pull hatches. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum gap of 0.5mm required). Screw the end fitting completely on the gas spring thread, without leaving any gap.

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
0.00 € HT Piece
0.00 € TTC
Cuurently out of stock
-
+
Add to cart
Traceparts
Print
Features
Reference
ST T28100+F1ViN
Stroke
100 mm
Rod thread diameter
M8
Tube thread diameter
M8
Rod diameter
10 mm
Tube diameter
28 mm
Rod end fitting
M8 Threaded Gas Spring
Tube end fitting
M8 Threaded Gas Spring
Thread
isometric
Gas spring max. force
1200 N
Gas spring min. force
150 N
Extended length
300 mm
Material
Stainless steel
Rod material
316 Chrome stainless steel
Tube material
316 Stainless steel
End type
Threaded (No end fittings)
Valve
Yes
Related products
The items below are suitable for your selected product
ST OUT8 | M8 | Aluminium
ST OUT8
ST OUT8 | M8 | Aluminium
ST OUT8
17.96 € HT
21.55 € TTC
Available
-
+

Stainless Threaded Gas Spring - Rod 10mm

Thread M8 | Stroke 100 to 250 mm | Force 150 to 1200N

1. Reference

Traction gas spring works in reverse to the compression gas spring. Used to hold or pull hatches. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum gap of 0.5mm required). Screw the end fitting completely on the gas spring thread, without leaving any gap.

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
0.00 € HT Piece
0.00 € TTC
Cuurently out of stock
-
+
Add to cart
Traceparts
Print
Features
Reference
ST T28150+F1ViN
Stroke
150 mm
Rod thread diameter
M8
Tube thread diameter
M8
Rod diameter
10 mm
Tube diameter
28 mm
Rod end fitting
M8 Threaded Gas Spring
Tube end fitting
M8 Threaded Gas Spring
Thread
isometric
Gas spring max. force
1200 N
Gas spring min. force
150 N
Extended length
400 mm
Material
Stainless steel
Rod material
316 Chrome stainless steel
Tube material
316 Stainless steel
End type
Threaded (No end fittings)
Valve
Yes
Related products
The items below are suitable for your selected product
ST OUT8 | M8 | Aluminium
ST OUT8
ST OUT8 | M8 | Aluminium
ST OUT8
17.96 € HT
21.55 € TTC
Available
-
+

Stainless Threaded Gas Spring - Rod 10mm

Thread M8 | Stroke 100 to 250 mm | Force 150 to 1200N

1. Reference

Traction gas spring works in reverse to the compression gas spring. Used to hold or pull hatches. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum gap of 0.5mm required). Screw the end fitting completely on the gas spring thread, without leaving any gap.

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
0.00 € HT Piece
0.00 € TTC
Cuurently out of stock
-
+
Add to cart
Traceparts
Print
Features
Reference
ST T28200+F1ViN
Stroke
200 mm
Rod thread diameter
M8
Tube thread diameter
M8
Rod diameter
10 mm
Tube diameter
28 mm
Rod end fitting
M8 Threaded Gas Spring
Tube end fitting
M8 Threaded Gas Spring
Thread
isometric
Gas spring max. force
1200 N
Gas spring min. force
150 N
Extended length
500 mm
Material
Stainless steel
Rod material
316 Chrome stainless steel
Tube material
316 Stainless steel
End type
Threaded (No end fittings)
Valve
Yes
Related products
The items below are suitable for your selected product
ST OUT8 | M8 | Aluminium
ST OUT8
ST OUT8 | M8 | Aluminium
ST OUT8
17.96 € HT
21.55 € TTC
Available
-
+

Stainless Threaded Gas Spring - Rod 10mm

Thread M8 | Stroke 100 to 250 mm | Force 150 to 1200N

1. Reference

Traction gas spring works in reverse to the compression gas spring. Used to hold or pull hatches. Caution: does not tolerate lateral forces. Never tighten on the fixing points (minimum gap of 0.5mm required). Screw the end fitting completely on the gas spring thread, without leaving any gap.

2. Enter the force
?

The force entered is a nominal force. The gas spring supplied is compliant if its actual force remains within the inflation tolerances shown below.

Force in Newtons

Tolerance margin
30 ≤ N < 50 + or - 10 N
50 ≤ N < 250 + or - 20 N
250 ≤ N < 750 + or - 30 N
750 ≤ N < 1500 + or - 60 N 
1500 ≤ N < 3000 + or - 150 N
3000 ≤ N < 6000 + or - 300 N
Your gas spring reference will be :
0.00 € HT Piece
0.00 € TTC
Cuurently out of stock
-
+
Add to cart
Traceparts
Print
Features
Reference
ST T28250+F1ViN
Stroke
250 mm
Rod thread diameter
M8
Tube thread diameter
M8
Rod diameter
10 mm
Tube diameter
28 mm
Rod end fitting
M8 Threaded Gas Spring
Tube end fitting
M8 Threaded Gas Spring
Thread
isometric
Gas spring max. force
1200 N
Gas spring min. force
150 N
Extended length
600 mm
Material
Stainless steel
Rod material
316 Chrome stainless steel
Tube material
316 Stainless steel
End type
Threaded (No end fittings)
Valve
Yes
Related products
The items below are suitable for your selected product
ST OUT8 | M8 | Aluminium
ST OUT8
ST OUT8 | M8 | Aluminium
ST OUT8
17.96 € HT
21.55 € TTC
Available
-
+
Manage my cookies

We use cookies
We use cookies and other tracking technologies to enhance your experience on our site, to show you personalized content and targeted advertisements, to analyze our site traffic, and to understand where our visitors come from.

Accept
Refuse